The rolls of Welded mesh are manufactured from galvanised wire and welded where the vertical and horizontal wires meet. The roll lengths depend on the mesh height with roll length varying 12.5m long to 25m long.
Standard available finishes are galvanised only or green coated RAL 6005 and black coated RAL 9005. Other colours are available in panel form please enquire.
Roll Form Weld Mesh
Cost effective Mesh Fencing
Stock Wire
Product specifications
Standard Mesh aperture sizes:
- 50mm x 50mm
- 75mm x 25mm
- List Item #4
- List Item #5
- List Item #6
Other aperture sizes available in panel form
Standard wire size:
- 2.5mm galvanised
- 3mm galvanised
- 2.5mm inner core 3 mm outer core when coated
- 3mm inner core 3.5 mm outer core when coated
- List Item #4
- List Item #5
- List Item #6
Roll form mesh is usually supported on horizontal line wires either 3.15mm high tensile or 3.55mm mild steel line wires, the mesh is secured to the line wires with stainless steel welded mesh clips. These stainless clips when crimped in place offer a secure, safe and difficult to remove fixing. (the line wires are threaded through or clipped to suitable support posts.
Suitable Posts:
- Circular Hollow Section (CHS)
- Square Hollow Section (SHS)
- Rectangular Hollow Section (RHS)
- Angle Iron (AI)
- Concrete posts
- All posts can be enhanced with a vertical or lean-over integral arm to support barbed wire and/or razor coils
Applications
- Utilities specifications
- Gallagher Power Fencing TM (electric fencing)
- FEN specifications
- Ministry of Defence (MOD Fencing)
- British Gas specifications
- Water Board specifications
- Railtrack fence specifications
- BAA (Hal) specifications
- Industrial fencing
- Schools, Colleges and University Fencing
- Council / local authority Fencing
To discuss and to cost your roll form welded mesh project, contact one of our fencing sales advisors today on 01730 237100
