Rolls of black welded mesh can be used for fencing and cages. The rolls are easily unrolled and secured to support posts.
A Black coated roll format welded mesh fence system comprises of support posts, line wires and rolls of welded mesh. The mesh can be supported on Angle Iron (AI), Square (SHS), Rectangular (RHS) and Tubular (CHS) sections.
The intermediate (line) posts are set at 3.0m centres, with straining posts at each corner and for mass court areas, at a maximum of 69.0 metre centres in one straight run. The rolls of chain link are secured to supporting line wires with fencing clips/rings/tie wire.
Black roll format welded mesh fencing
Manufacturer of steelwork for Black coated welded mesh fencing.
Black coated perimeter fencing and gates.
Product specifications
Corrie Black roll form welded mesh specifications:
- 50 x 50 x 3.55mm x 3.0mm
- 50 x 50 x 3.0mm x 2.5mm.
50mm = The diamond size.
The larger dimension (eg 3.55mm) = overall coated size.
The smaller dimension (eg 3.0mm) = inner wire size
If you require another aperture size or wire thickness please enquire**
Black coated RAL 9005
Standard 50 x 50mm welded mesh heights available:
- 900mm black welded mesh (3ft)
- 1200mm black welded mesh (4ft)
- 1500mm black welded mesh (5ft)
- 1800mm black welded mesh (6ft)
- 2100mm black welded mesh (7ft)
- 2400mm high black welded mesh (8ft)
Standard Roll length 25.0m
Taller heights are made up with multi lifts of welded mesh i.e. 2400mm plus 900mm = 3000mm high (allowing for a 300mm over lapped join).
If you have another height that is not listed please enquire **
Standard 75 x 25mm green welded mesh heights available:
- 1800mm high x green welded mesh (6ft) 75 x 25 x 3.5mm x 3mm x 25m rolls
- 2400mm high x green welded mesh (8ft) 75 x 25 x 3.5mm x 3mm x 12.5m rolls
If you require another height that is not listed please enquire **
Support posts available:
- Angle iron
- SHS (Square hollow section)
- RHS (Rectangular hollow section)
- OD (tubular hollow section)
Single leaf and double leaf gates available please enquire
Standard finishes:
- Galvanised & Black RAL 9005 .
We manufacture gates to match within our British manufacturing facility; these include manual single leaf swing gates, manual double leaf swing gates, bi folding gates, sliding gates, hatch gates, wicket gates.
- Self-closing gate sets
- Exit gates with emergency exit ironmongery
- Manual coded locks
- Access control entry / exit gates
- We also manufacture posts with welded plates for bolting down to a floor / to a wall
**subject to availability / qualities
Applications
- Boundary fencing
- Country park fencing
- Tennis court fencing
- Deer fencing
- Highway fencing
- Farm fencing
- Railway fencing
For black coated fencing, email us or call us on 01730 237100 today to discuss your project
