Sports Fencing Graduate 358 PA System

The Graduate 358 PA system is an upgraded alternative to our standard 358 PA system.

The Graduate 358 PA system offers the multi-use games market, excellent value for money with true rebound performance, durability and appearance but with an increased upper mesh strength compared to our standard roll format PA 358 system. The Graduate system is supplied with RHS and/or SHS support posts and gates to match.

The supporting steelwork is clad with seamless 2515mm wide panels in heights of 3.0m or 4.0m. The Graduate panels consist of three varying apertures in one complete sheet. The lower 1200mm high true rebound 358 section consists of a standard 76.1mm x 12.5mm x 4mm rigid mesh. The apertures directly above the 358 between 1.2m and 2.4m high will be 75mm x 25mm. The upper section between 2.4m and either 3.0m or 4.0m will be in a 75mm x 50mm grid. All horizontal and vertical wires are manufactured from 4mm wires.

The Graduate panel is completed with a set of mild steel angle iron bracing rails set at ground level and at 1.2m high. A further angle iron top rail complete with a 25 x 5mm clamp bar can be introduced to the top of the panels for increased strength or where the height is increased above 3m. The standard, but not restricted to, heights of a Graduate 358 PA system would be 3.0 or 4.0 metres. Other matching meshes, netting and make up panels can be used to increase the height further to 6.0 metres and beyond.

  • Cost effective
  • True rebound
  • Proven construction
  • Single and double leaf gates
  • 2.4m – 6.0m plus high
  • Options include
  • Goal recesses
  • Up rated goal areas with double height 358
  • Combined basketball/goal areas


  • Sports pitches
  • Multi-use games areas (MUGAs)
  • Schools
  • Leisure Centres

Alternatives To Consider

  • Standard 358 PA system
  • Rebound board PA system
  • Corrie POWER play
  • Corrie Play